Omni-directional planetary ball mill

All-round planetary ball mill is equipped with four ball milling tanks on a large plate. When the large plate rotates (revolving), the ball milling tank rotates on its revolving track. While the large plate and the ball milling tank do planetary motion, they can also do 180-degree tipping bucket-type turnover within a three-dimensional space range, and can be set to operate at any fixed point. Make the ground material more uniform, and can solve the problem of sinking and sticking to the bottom of some materials.

Purpose: QM-QX all-round planetary ball mill is a necessary device for mixing, fine grinding, sample preparation, new product development and small batch production of high-tech materials. The product is small in size, full-featured, high efficiency, low noise, is a scientific research unit, institutions of higher learning, enterprise laboratory to obtain research samples (each experiment can be obtained at the same time four samples) ideal equipment, equipped with vacuum ball milling tank, can be in the vacuum state or inert gas under the protection of the sample grinding. The product can be crushed and mixed with different particle size and different materials by dry and wet methods. The minimum particle size of the ground product can reach 0.1 microns (I. e. 1.0 × 10-4mm). Widely used in soil, geology, minerals, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, environmental protection and other departments.

All-round planetary ball mill is equipped with four ball milling tanks on a large plate. When the large plate rotates (revolves), the ball milling tank rotates on its revolving track. While the large plate and the ball milling tank are doing planetary motion, they can also do 180-degree bucket-type turnover within a three-dimensional space range, and can be set to operate at any fixed point,. Make the ground material more uniform, and can solve the problem of sinking and sticking to the bottom of some materials.

Note:Please contact me for the specifications of various ball milling tanks.

Technical indicators:

Transmission mode: gear transmission

Working mode: two or four ball milling tanks work at the same time

Maximum sample size: 2/3 of ball milling tank volume

Feed size: soil material ≤ 10mm, other material ≤ 3mm

Discharge particle size: minimum speed ratio of 0.1um (revolution: rotation):1:2 speed (rotation):0.4L: 0~600 r/min 2L:0~580 r/min 4L:0~530 r/min 10L: 0~350 r/min 20L:0~270 r/min 60L:0~230 r/min 100L:0~200 r/min M, rotation assembly turnover cycle: 1 minute

Control mode: frequency conversion stepless speed regulation, program control, automatic timing forward and reverse, timing shutdown maximum continuous working time (full load):48 hours

Features:

★All-round planetary motion, no dead angle, more uniform

★The gear drive ensures the consistency and repeatability of the experiment

★Four different samples can be obtained at a time

★Variable frequency speed regulation, program control

★Able to solve the problem of sinking and sticking to the bottom of some materials

Product configuration:

Standard configuration: Host

Optional accessories:

Mill Tank Material: Stainless Steel, Agate, Ceramic, Nylon, Polyurethane, PTFE, Zirconia, Cemented Carbide

Ball milling tank specifications: 50ml,100ml,250ml,500ml,1000ml,2000ml,3000ml,4000ml,5000ml,10L,15L,20L,25L

Grinding ball material: stainless steel, agate, ceramic, zirconia, carbide

Grinding ball specification: Φ6,Φ10,Φ20